MONOCOAT OIL FOR ALL INTERIOR WOOD SURFACES SUCH AS RAW, STRIPPED OR HARDWOOD; FLOORS, FURNITURE, WALLS, CEILINGS AND WOODWORK.
Oil for floors, furniture, kitchen cabinets, counter tops, kitchen islands, interior doors and windows, woodwork, walls and ceilings.
EASY SOLO natural oil provides an excellent resistance to abrasion and creates no surface film. Thanks to its penetrating capacity, EASY SOLO nourishes the wood and protects it against water marks and stains. With EASY SOLO, you can easily touch up anytime without sanding or stripping to refresh the finish.
LIGNA’s EASY SOLO Monocoat wooden floor Oil is a new generation of natural oil that provides great protection against moisture and abrasion. It enhances the grain of the wood, protects it from premature wear, water and stains. You could do all your interior wood surfaces with only this product, then save time, money and be able to enjoy them faster.
Due to its high solid composition (up to 70% natural oils and resins), EASY SOLO will offer a durability that is equal to old generation products that need two or three coats. Used to protect hard surfaces, it can be easily applied to all types of soft, hard and exotic woods.
- Formulated in renowned laboratories with more than 25 years of experience, LIGNA products offer an “avant-garde” technology that is assembled in Canada.
*** Pro Tip *** EASY SOLO is a high quality oil with great resistance to abrasion. For less stressed surfaces such as walls, ceilings, mouldings and auxiliary furniture, you can mix 1 part of LIGNA ’s ISO-DILUANT or EVO’s CITRUS SOLVENT in 4 parts of EASY SOLO oil. This mixture will give an excellent protection, will be easier to apply and will finally be less expensive. LIGNA also offers PRONTO, a ready-to-use natural oil product, used on less stressed surfaces, available with the same colours.
PREPARATION:
The surface must be clean and free of wax and varnish residue. Make sure the product is at room temperature before application.
Mix before applying. Sand wood with 100-120 grit sandpaper. Remove dust with a clean, dry, WHITE COTTON RAG. Keep EASY SOLO at a temperature above 15 °C.
For high-density wood, such as maple or exotic woods, moisten with a clean floor mop or damp WHITE COTTON RAG. When the surface is completely dry (about 2 hours), sand gently with 220 grit sandpaper to break down the wood’s fibre. Remove dust meticulously.
APPLICATION:
Apply a thin coat with a WHITE COTTON RAG or an APPLICATOR PAD for furniture and a PAD PAINTER for the floor. Spread EASY SOLO well to avoid increased thickness. After 5 to 10 minutes maximum, with the help of a clean, dry, WHITE COTTON RAG, scrub along the wood grain to help oil penetration and eliminate any excess.
Optional – To soften the surface and increase lustre, polish with a white nylon pad about 60 to 90 minutes after application.
- After 24 hours: moderate and careful use;
- After 5-7 days: regular use;
- After 10 days: maintenance with LIGNA products.
NUMBER OF COATS:
Only one coat is needed.
Two coats will increase the lustre, the resistance and the color will be accentuated by 20%
Wait 24h for a second coat.
WARNING: On low-density woods such as pine, we recommend two coats to seal the wood correctly.
COVERAGE:
200 to 500 sq. ft./litre depending on wood type.
With its high-covering power and monocoat application, EASY SOLO is currently the most economical product for floor finishing. (Ex.: $0.24 per sq. ft. for a maple floor)
200 to 500 sq. ft. per litre depending on the density of the wood species to be protected.
⇒List of covering powers⇐
TOOL CLEANING:
Use LIGNA thinner, ISO-DILUANT.
MAINTENANCE:
Use LIGNA SOLIA and SOLIA+ soap for oiled surfaces.
Wait 10 to 15 days for the surface to be well sealed before it comes into contact with water.
REFRESHMENT COAT:
Add a thin coat of oil after:
- Floor: 3 to 7 years;
- Low demand surfaces such as mouldings, walls and furniture: 7 to 15 years.
COMPOSITION:
Blend of vegetable oils, resins and waxes.
VOCs:
As it spread only 244 g of volatile organic compounds (VOCs) per litre and is a single-coat product, EASY SOLO releases 3 to 8 times less VOCs than the competing products applicable in two to three coats.
FINISH:
Matte satin.
CONSERVATION:
From 2 to 3 years in an airtight container stored in a dry and cool place.
SIZES:
20 mL/237 mL/946 mL/3.78 L/18.9 L.
